Panels
Rigid high quality CFC free PU-foam sandwiched between pre-coated steel or aluminium
sheets, using state-of-the-art high pressure injection machine.
Walls
Formed by joining panels with eccentric cam-locks.
Floor
Suitably reinforced panels to bear minimum 2000 kg/m2 load or as desired by customers.
Roof
Roof panels covered with specially
designed sunroof for better insulation and to eliminate leaks.
Door
Made of insulated panel with extruded aluminium profiles. The closure is by means
of three-point locking system and an espagnolette-locking cylinder provides a
dust proof enclosure. The door has pick proof security studs, (i.e even if door
hinges are removed, the door panel cannot be taken out).
Joining
Wall panels are joined together with camlocks and outer angles to form a monocoque
frame for structural stability.
Sealing
All joints are sealed with high quality sealants.
Assembly
Can be assembled at site within 3 days or at customer’s warehouse and then taken
to site.
Size
Tailor made to customer's
specification.
Mobility
Zeppelin
shelters can be easily transported on trailers and can be fork or crane lifted
using specially designed skids on demand.
Foundation
Our standard shelters do not require an elaborate base frame. ISMB’s are placed
on concrete pillars which are cast in-situ at site.
Wind
load factor
Upto 160-180 kmph. (It is important to have regular
check-ups of the mounting arrangement) Seismic shock bearing capability: Suitable
for seismic zone 4. For other zones, special design can be adopted on request.
Skids
High quality skids made of ISMB for
lifting of the shelters, if required.
Mounting of
Equipment
Extruded aluminium alloy C-rails for mounting of equipment,
cable ladder, tube lights etc. provides immense flexibility to re-locate equipment
and fixtures of different heights and dimensions without drilling holes in the
shelter walls, ceiling and floor. | |
